Light guide plate, ultra-thin light box, light guide light box, crystal light box, plastic light box, energy saving light box, T5 fluorescent lamp, T5 tube, electronic ballast, eefl external electrode fluorescent lamp, eefl inverter
The ultra-thin light box of the edge light guide plate is a high-tech product using the international advanced “backlight” technology. Ultra-thin, beautiful, energy-efficient, soft light, uniform brightness and pleasing to the eye. The technology was first developed for LCD screens in notebook computers. It has been widely used in various fields including the field of optoelectronics. Light guide plate ultra-thin light box features:
- Ultra-thin: thickness between 1 cm and 4 cm
- Beautiful appearance: suitable for any fashion area
- High efficiency and energy saving: more than 60% energy saving than traditional light boxes
- Brightness: The variable line source is a surface light source, the illumination is more uniform, softer and more comfortable.
- Easy to install: Quickly open the design, it is simpler and faster to replace the lamp, and it can be replaced within five minutes.
- Patented light guide technology design: its principle and effect can be comparable to the LCD screen of notebook computers.
Light source introduction
The electrode of the EEFL (External Electrode Fluorescent Lamp) lamp is outside the lamp tube, which is different from a general fluorescent lamp. The electric field generated between the external electrodes forms the illuminant plasma of the tube.
Advantages of the EEFL light guide ultra-thin light box:
1, a variety of sizes (lamp length from 20-170CM, free combination)
2, high energy saving (depending on the length of the lamp, the power is only 3-6 watts, comprehensive energy saving 50%-70%)
3, long service life (its principle determines long service life, good stability and high efficiency, up to 60,000 hours, three years of quality problems, free exchange)
4, the volume is small (the diameter of the lamp is 0.5-0.8 cm, saving the volume of the light box)
5, low temperature (the surface temperature of the lamp is only about 38 degrees, use indoors to reduce the load of the air conditioner, the use is very safe)
6, multi-color (red, yellow, blue, white, green, color temperature can be selected from 2500K-17500K)
- Uniform light (EEFL can form a uniform plasma column along the tube axis to make the illumination uniform)
8, drive multiple lamps (EEFL used in the town (EEFL power), one can drive multiple lamps)
9, maintenance-free (saving lamp replacement personnel and lamp cost)
Our ultra-thin light box products are divided into aluminum frame series, stainless steel frame series, crystal frame series and plastic frame series according to the outer frame. We named them AF, SSF, CF and PF…
Made of aluminum alloy profile, surface oxidized, silver white (surface customizable metal baking finish)
Product light source
Energy saving lamps, LEDs and EEFL
The energy-saving lamp adopts Phillips or Osram T5 lamp. It meets international standards, the luminous efficiency is above 100Lm/W, and the service life is 10,000 hours. The above T5 high-efficiency energy-saving lamp adopts tri-color rare earth powder fluorescent tube, no radiation, more than T8 tube. Fine, luminous efficiency is higher, its light is flicker-free, close to natural light, and its color rendering index is high. The object being illuminated is bright and clear, suitable for long-term work places, which can make workers feel comfortable and give people excitement and liveliness. Illuminate the feeling. In the case of the same power consumption, the T5 high-efficiency energy-saving lamp is 35%~50% energy-saving than the T8 fluorescent lamp, the line current is reduced by 3 times, and its basic non-heating life can be extended by 2~3 times to realize the green lighting of energy saving and environmental protection.
EEFL light efficiency is above 168Lm/W and life is more than 60,000 hours. EEFL is made of hard glass tube – high borosilicate glass, which is thinner than T4 tube. EEFL high efficiency energy saving lamp is more than 50% energy saving than T4 fluorescent lamp.
LED strips are divided into high density LED strips and general density LED strips
High-density LED light bar: 1 meter up to 148 LED lights, one meter power is 9W, life expectancy is more than 50,000 hours
General density LED strip: one meter 65 LED lights, one meter power is 4W, life is more than 50,000 hours
It adopts optical grade acrylic plate, which is laser-doped after precision calculation, with a thickness of 5MM. It has reached international standards after CCC and CE certification. The light guide plate is divided into an engraved light guide plate and a silk screen light guide plate.
It adopts optical grade acrylic plate with thickness of 1.8MM and has passed international standards for CCC and CE certification. The best use of the cover is PC! The maximum temperature is 145 degrees and the lowest is -45 degrees. PC is an amorphous, odorless, non-toxic, highly transparent colorless or slightly yellow thermoplastic engineering plastic with excellent physical and mechanical properties, especially excellent impact resistance, high tensile strength, flexural strength and compressive strength; Small creep and dimensional stability
Zhengcheng PC endurance board–light box special board
Zhengcheng PC endurance board–light box special board
Reduce line current by 3 times, and meet international standards after CCC and CE certification
- T5 tube
14W length 590 mm
21W length 890 mm
28W length 1190 mm
Light box power W = the length of the light guide side corresponds to the power of the corresponding lamp and multiplied by 2
2.LED light bar
Light box power W (high density) = (light guide length mm-30) × 0.0176
Light box power W (general density) = (light guide length mm-30) × 0.0088
- Aluminum bead
Aluminum alloy material, high thermal conductivity, good heat dissipation, keeping the lamp temperature below 60 °C. It can protect the lamp tube so that the lamp tube is not easily broken.
- Extreme care should be taken during the manufacture and transport of the light guide to prevent the light guide from breaking.
- When cleaning the light box, use a soft textile dampened and wipe gently.
- When removing the protective film on the surface of the light guide, do not use sharp instruments.
- The light guide must be safe during the installation process.